Our Disposable Face Masks are a 3 layer design that uses non woven inner and outer layers and a central melt blown fabric layer for optimal filtration performance. Also known as procedure or isolation masks, Disposable Face Masks consist of the tri laminate material mentioned above, a mask clip and earloops. The nose clip consists of iron wire with a low density polyurethane plastic coating. Finally, the mask earloops are made from elastic material woven from spandex and polyester.
These masks provide a 98% Bacterial Filtration Efficiency (BFE) as well as Synthetic Blood splash resistance at a 120 mmHg pressure level. However, unlike our KN95 respirator, procedure/isolation masks will not form an airtight seal around your nose, mouth and face. They will protect individuals who are in the vicinity of the wearer from respiratory droplets he or she may emit while coughing, sneezing or even speaking.
Disposable Face Masks are non sterile products for health care usage in non surgical environments. Do not use them for protection while performing surgical procedures. In addition, they are a single use product and you should discard them after use. If they become wet or contaminated by blood or body fluids, they should be discarded and replaced. Please discard your procedure or isolation masks in accordance with regulations on managing medical waste.
You can use the procedure mask as an additional layer of protection in conjunction with full facial protection from a face shield like the DynaPro Face Shield.
50 masks per box.
Disposable Face Masks – Usage Instructions
- The procedure mask inner layer is white and the outer layer is blue. When wearing the mask, the blue layer should face outward;
- Cover the nose, mouth and chin with the isolation mask and hang the mask on both ears using the earloops;
- Place your fingertips on the Disposable Face Mask nose clip. Press down gently with your fingertips. Mold the nose clip according to the shape of your nose to obtain a secure fit.